CART: Cart is empty | Checkout
Bestsellers
-
$1.25
Orange Heavy Duty Fuel Line 1/4" ID
-
$1.25
Clear Fuel Line 1/4" ID
-
$1.25
Colored Fuel Line 1/4" ID
-
$1.30
OTK Kart Numbers
-
$2.40
Freeline Birel Fuel Line
CKS
Products
- per page
Nylon Chain Guard Strap
Select Color, Flat Plastic Chain Guard Strap
Measures 19 3/4" x 1 3/4", Thickness .105"
Measures 19 3/4" x 1 3/4", Thickness .105"
$5.00
Plastic Radiator Overflow Tank for IAME OEM Radiator
Gray Plastic Water Overflow Tank, Fits Under Cap on IAME OEM Radiator and other Radiators with 1 3/16" ID Radiator Cap Only
Will not fit on New Line Radiators
1 3/16" Hole Size
Will not fit on New Line Radiators
1 3/16" Hole Size
$29.95
Plastic Throttle Cable, Brake Line Housing
Heavy Duty White Plastic, 3/16" OD, MCP and Enginetic Brake Line
This is cut as a continuous piece. Example - If you order 7 feet, you will get (1) 7 foot piece, not 7 one foot long pieces.
This is cut as a continuous piece. Example - If you order 7 feet, you will get (1) 7 foot piece, not 7 one foot long pieces.
$0.50
Racer's Duct Tape
Racer's Duct Tape, Black, Blue, Red, White, Silver, Yellow
Large Roll 2" Wide X 180 Ft.
Large Roll 2" Wide X 180 Ft.
$9.50
Sale! Comet Third Bearing Yamaha KT100 Support Kit
Heavy Duty for Yamaha KT100, Requires Bottom Slider Mount
Works great with the Burris 593 Bottom Slider
Works great with the Burris 593 Bottom Slider
$86.00
| Market price: $115.00
,
save 25%
Small Barry Clips
Small Barry Clips - Great for #10 thru 5/16" Bolts
Buy a 10 Pack and Save $$
Buy a 10 Pack and Save $$
$0.65
Small Rubber Grommet
3/4" wide, 1/8" thick, 1/4" Hole Size
Great for Floor Trays, M6 and 1/4" Bolts
Great for Floor Trays, M6 and 1/4" Bolts
$0.45
Steering Shaft Block and Lock Kit to Set Toe
Makes Setting Front End Alignment Simpler, Choose Your Steering Shaft Size
Steering Wheel Shaft Lock, 20mm or 19mm (3/4") Available
Steering Wheel Shaft Lock, 20mm or 19mm (3/4") Available
$29.00
Uniball Steering Shaft Bearing 8x22mm
European Steering Shaft Lower Uniball Bearing, 8mm Hole Size for Shaft End, 22mm OD
$19.00
Unpainted Barstool Frame
Frame Only for Bar Stool Project, Unpainted Bare Frame, Welded
Due to the size and weight of this item we must charge additional UPS
Due to the size and weight of this item we must charge additional UPS
$335.00
Vinyl White Stick On Driver Panel
Driver Panel - 9 3/4" Tall, 8 1/2" Wide
Shaped for use on most CIK driver panels
Buy a 4 Pack or 10 Pack and Save $$
Shaped for use on most CIK driver panels
Buy a 4 Pack or 10 Pack and Save $$
$1.95
Yellow Pre-Filter Foam Sock, 6 1/2" Long
Foam sock fits over fabric filter to help keep out dirt
$4.50
5229.S Aftermarket Arrow 11mm Thick Rear Brake Pads for 125cc Shifter Kart and Arrow X3
Arrow Aftermarket Brake Pad Pair for Shifter and Arrow X3 Self Adjusting Brake Caliper
$33.00
Interstate Batteries TAG Battery, 12 Volt, 9AH
High Rate Interstate Battery
12 volt 9 amp hour (36W) VRLA AGM Sealed Maintenance Free Rechargeable Battery, Nonspillable, HSL1079, NOT OEM Battery
5.65 Pounds
12 volt 9 amp hour (36W) VRLA AGM Sealed Maintenance Free Rechargeable Battery, Nonspillable, HSL1079, NOT OEM Battery
5.65 Pounds
$54.00
Digital Dial Caliper, Metric/Standard Measurements
Digital Display Dial Caliper, Includes Carrying Case
Dial Caliper can display millimeters, inches, fractions
Dial Caliper can display millimeters, inches, fractions
$39.95
New! TaG Kart Lightweight 12 Volt Lithium Starter Battery, LiFePO4
TaG Kart Lithium Iron Phosphate Light Weight Kart On Board Starter Battery
Same size and dimensions as heavier lead acid batteries typically used with onboard starters
12.8 Volt, 7 Ah, 1.75 Pounds
2 Amp Battery Charger Optional
Same size and dimensions as heavier lead acid batteries typically used with onboard starters
12.8 Volt, 7 Ah, 1.75 Pounds
2 Amp Battery Charger Optional
$93.90
Predator/Clone Throttle Linkage Kit
Throttle linkage designed for use with stock carburetor and stock linkage plate while utilizing stock fuel tank. Fits Honda GX200, Chinese clone OHV, and the Harbor Freight Predator 212 engines.
$37.50
Comet Racing Engines Sticker - New Style Blue/White Oval
Select Size
Newest Comet Racing Engines Logo Decal Design
Newest Comet Racing Engines Logo Decal Design
$0.50
1 1/4" Lightweight Rear Wheel Hub, US Pattern
Aluminum, Hardware Sold Separately except pinch bolt
1 13/16" Long
1 13/16" Long
$17.50
1/4" (6mm) Plastic Conical Washer
Select Color
Fits 1/4” or 6mm Conical Bolts
Great washer size for mounting bodywork and floor trays
Fits 1/4” or 6mm Conical Bolts
Great washer size for mounting bodywork and floor trays
$1.00
18X Red Plastic Exhaust Header Cover for New Style X30 Header, KA100 Senior Header
Fits IAME X30 New Style Senior Header, KA100 Senior Header, Goes over the outside of the Manifold
Measures 1 11/16" (43mm) at widest point, then tapers
Measures 1 11/16" (43mm) at widest point, then tapers
$1.00
208mm (8 3/16") Vented Rear Brake Disc, Swirl, Steel
12mm Thick Disk, Fits a 6 Bolt Pattern Hub
$129.00
- per page