home | Bar Stool Project

Bar Stool Project


This is only an Example of a completed bar stool, No instructions are included, Front foot rest is not Available
Customer supplies Engine and Barstool
** The bar stool project comes unassembled, unpainted and requires some welding (steering forks and rear bumper)

Products

Unpainted Barstool Frame
Frame Only for Bar Stool Project, Unpainted Bare Frame, Welded

Due to the size and weight of this item we must charge additional UPS
$225.00
1 1/4" x 40" Steel Axle
Black Oxide, 1/4" Keyways
$65.00
1/4" x 1/4" Keystock
1/4" x 1/4" x 12" Long
$3.00
1 1/4" Appco Aluminum Sprocket Hub with Bolts
1 1/4" Cast Aluminum
$28.00
1 1/4" Bearing Flangette with 3 Holes
Flangettes are Sold Per Side, One Bearing Requires Two Flangettes
$3.00
1 1/4" UFR Axle Bearing
Recommend 2 for project
$15.00
1 1/4" Rear Wheel Hub, Standard
1 1/4" Billet Aluminum, Bolt Kit Sold Seperate
$17.50
1 1/4" Two Piece Aluminum Lock Collar
1/4" Keyway, Billet Aluminum
$5.50
5/8" Front Wheel Hub, Standard
Bolt Kit Sold Separately
$17.50
Steel Handle Bar, Black Oxide Finish
Handle Bar for Bar Stool Project
$39.95
Aluminum Handle Bar Steering Shaft Hub
Splined for 5/8" Steering Shaft, Fits 7/8" OD Handle Bar
$49.95
Two Hole Red Aluminum Steering Block with Needle Bearing for Top
Top Steering Block
$17.95
One Hole Red Aluminum Steering Block with Needle Bearing for Bottom
Steering Block for Bottom of Steering Shaft
$17.95
7/8" Twist Grip Assembly with Dummy Handle
For 7/8" Shaft, Includes Twist Grip and Standard Rubber Hand Grip
$28.95
8137-28 Azusa Steering Shaft 5/8" OD
28" Length, Splined, Solid
$14.95
8129 Azusa Ackerman Arm
Weld On Steering Shaft Arm

Requires 2 For the Steering Shaft
$2.50
8554 5/8" Lock Collar
Locking Collar for Steering Shaft
$2.00
5/8" Lock Nut
Lock Nut for Spindle Shaft End, Sold Individually
$1.30
5/8" x 1/2" Wheel Spacer
Spindle Shaft Spacer
$0.95
Azusa Front Spindle 5/8"X4 1/2" Long With King Pin Bushings
Front Spindle with 5/8" Shaft, 4 1/2" Long
$19.95
8447 Azusa 5/8" King Pin Bolt
5/8" Diameter Shaft
$2.75
Wheel Hub Bolt Kit 1/4-28
Includes 3 Bolts and Flange Nuts
$1.50
Righetti Ridolphi 3 Liter Fuel Tank
Plastic Quick Release Style Fuel Tank
$49.00
Kartech Arrow Fuel Line
Sold Per Foot
$1.50
Vent Hose Check Valve
One Way Inline Valve
$11.95
Hand Brake Activated Hydraulic Master Cylinder for Handle Bars
Left Hand, Bolts to Handle Bars, Fits 7/8" or 1" Diameter Bars

Made in Europe, DOT 4 Fluid
$75.00
MCP Mini Lite Brake Caliper, Black
Billet Aluminum with Pads, Black
$107.00
712 MCP Standard Rear Slotted Steel Disc
7 1/8" Diameter
$25.00
MCP Light Aluminum 1 1/4" Brake Disc Hub
4 Bolt Pattern Hub
$19.95
MCP 6" Mini Lite Brake Disc
Small Diameter Brake Disc
$30.00
MCP Mini Lite Brake Disc Hub
Three Bolt Pattern for Small 6" Brake Disc
$22.50
MCP Rear Billet Brake Caliper 181375
Standard Brake Caliper, Replaces Cast #1375 Caliper
$119.00
Brake Bracket, Aluminum
Works with Standard and Mini Lite Brake Caliper
$27.00
T Brake Line Fitting
Three Way Brake Fitting for 3/16" Brake Line
$7.50
3/16" Nylon Brake Line
Sold by the Foot
$0.45
8oz DOT 5 Brake Fluid
Brake Fluid for MCP Brakes
$9.00
Burris 550x6 TX22 Grooved Tire
Front Tire
$62.00
5 1/2" x 6" Douglas Wheel, Polished
Wheel for Front Tire
$35.00
Burris 8.00 x 6 TX22 Grooved Tire
Rear Tire
$70.00
8 1/4" x 6" Douglas Wheel, Polished
Wheel for Rear Tire
$38.00
5/16" Tie Rod End
Select Thread Type
$7.00
094126 8" x 5/16" Tie Rod
094126 8" x 5/16" Tie Rod
$16.95
FPC-1 Walbro Fuel Pump
Gas or Alcohol, 2 3/4" Mount Holes Center to Center
$23.00
Max-Torque Clutch 12t #35
3/4" Bore with Bolt Kit
$39.00
CKS #35 Chain 4ft
Chain, 4 Feet Long
$13.00
DJ1138B ARC Header
Clone Engine Header, Muffler Sold Separate
$26.00
4117 RLV Clone Mini Silencer
Screw on Style, Threaded Outside
$17.25
DJ1146 ARC Throttle Plate
Aluminum, All Hardware Included
$29.95
DJ1257 ARC Choke Bracket
Holds Choke Braket, Bolts to Back of Filter Cup
$3.50
DJ6931 ARC Air Filter Cup
2 7/16" OD, Billet Aluminum for Clone
$15.00
Racersites

All Contents © copyright Comet Kart Sales 2018 All rights reserved.

Website design and development by RACERSITES