CART: Cart is empty | Checkout
Bestsellers
-
$1.25
Orange Heavy Duty Fuel Line 1/4" ID
-
$1.25
Clear Fuel Line 1/4" ID
-
$1.25
Colored Fuel Line 1/4" ID
-
$1.30
OTK Kart Numbers
-
$2.40
Freeline Birel Fuel Line
CKS
Products
#11 Nerf Bars - CKS LTO Double Rail Nerf
Left Side Only, Attachment Points are 28 1/2" Center to Center
$39.00
#12 Nerf Bar, Short Double, Old Style
Left Hand Only, Attachment Points are 17" Center to Center
$10.00
#14 Nerf Bar Short Single Rail Pair, Close Out
Attachment Points - 16 1/2" LH Center to Center
Attachment Points - 11 1/2" RH Center to Center
Attachment Points - 11 1/2" RH Center to Center
$20.00
#18 Nerf Bar Tire to Tire, Double Rail, Left Side Only
1995 WKA Legal Sprint Sit-Up Nerf for Mach I or EXP
Attachment Points - 27" Center to Center
Attachment Points - 27" Center to Center
$59.00
3"X5" Long Open Top Foam Sock, Red
Great for Briggs LO206, Animal, and World Formula. Slides over Fabric air Filter
$3.50
Aluminum Sprocket Holder
Keep your sprockets organized with this rack, 24 Slots, Fits 219 and 35 pitch sprockets
$39.00
Bar Stool Project Kit with Wheels and Tires
Bar Stool Project Kit, Includes everything except Engine and Barstool
With or Without Wheels and Tires
With or Without Wheels and Tires
$1699.95
Briggs Flathead Carb Rain Cover/Dirt Deflector
Plastic Briggs Flathead/Raptor Carb Rain Cover or Dirt Deflector
$11.95
Briggs LO206 Carburetor Float Height and Float Drop Gauge Tool
Adjustable slide so you can set your Briggs LO206 carburetor float height accurately. Also measures float drop.
$29.95
Chrome Sprocket Holder
For One Piece Sprockets only, Easily transport your sprockets with this rack
$39.95
CKS Clutch Bolt Mounting Kit for Briggs. Clone, Honda
Bolt, Flat Washer and Locking Washer for PTO End of Engine Crankshaft
*Works On Many Clutches*
Engine Clutch Bolt Kit for Four Cycle Engines
*Works On Many Clutches*
Engine Clutch Bolt Kit for Four Cycle Engines
$2.25
Comet 17mm American Pattern Lightweight Front Wheel Hub
US Pattern Front Wheel Hub for 17mm Spindle Shafts, Double Register Design Allows Wheel to Mount to Either Side of Hub
The Comet Lightweight Hub includes low friction bearings
Includes 5/16-24 Mounting Bolts and Nuts
The Comet Lightweight Hub includes low friction bearings
Includes 5/16-24 Mounting Bolts and Nuts
$39.00
Comet 3.5 Liter KG Fuel Tank Adapter Kit for OTK Full Sized Karts
Ever wanted to run a smaller fuel tank than the 8.5 liter OTK tank in your full sized OTK kart? With this adapter kit you can now run a 3.5 Liter KG fuel tank to run less fuel and save weight!
Kit includes 3.5 Liter KG fuel tank, mounting adapter and hardware
Available as a complete kit or adapter only without tank
Kit includes 3.5 Liter KG fuel tank, mounting adapter and hardware
Available as a complete kit or adapter only without tank
$98.47
Comet Counter Shaft Gear Oil for X30, Rok, Rotax
Comet's Counter Shaft Full Synthetic Gear Oil is engineered to Minimize Friction and Wear while increasing Bearing and Gear Life and Reducing Operating Temperatures.
Same performance but no longer contains the blue dye!
Used in All Comet Blueprinted X30 and Rok GP Engines for Low Friction and Increased Bearing Life
Designed for IAME X30, Rok GP, Rotax Max, Quarter Midgets Balance Shaft Gears and Gear Box Cases
1 Quart Bottle
Small 8 Ounce Squeeze Bottle for Easy Refill of Gear Boxes Sold Separately
Same performance but no longer contains the blue dye!
Used in All Comet Blueprinted X30 and Rok GP Engines for Low Friction and Increased Bearing Life
Designed for IAME X30, Rok GP, Rotax Max, Quarter Midgets Balance Shaft Gears and Gear Box Cases
1 Quart Bottle
Small 8 Ounce Squeeze Bottle for Easy Refill of Gear Boxes Sold Separately
$24.95
Comet Foam Seat Pad Kit, Side Padding
Sticky Back Seat Side Padding for Rib Area on Karting Seat
Sold as a Pair, (1 Right, 1 Left)
Sold as a Pair, (1 Right, 1 Left)
$17.50
Comet Kart Sales Black Fitted Mesh Hat with White Stitching
Select Size
Comet Kart Sales Embroidered Hat
Comet Kart Sales Embroidered Hat
$22.00
Comet Kart Sales Retro Logo T-Shirt
Select Size and Color
Comet Kart Sales Retro Logo T-Shirt, Crew Cut, Styled after our logo from the 1970's with updated colors and stressed design for that vintage look!
Single Side, Screen Printed on Front, Soft Shirt Material
Comet Kart Sales Retro Logo T-Shirt, Crew Cut, Styled after our logo from the 1970's with updated colors and stressed design for that vintage look!
Single Side, Screen Printed on Front, Soft Shirt Material
$22.00
Comet Quick Adjust King Pin Bolt 3/8"
Threaded Bolt Allows Fast Cross Weight Adjustment or ride height changes
$31.00
Comet Racing Engines Multi-Purpose Tape Roll
White Tape with Comet Racing Engine Logo, Great for Radiators, Seat Padding and More
2" Wide x 110' Long
2" Wide x 110' Long
$6.50
Comet Yamaha International Slider Motor Mount
Black Aluminum 2-Cycle Mount, International Rail
This mount has Yamaha bolt spacing, Can also be drilled to mount a third bearing support on.
This mount has Yamaha bolt spacing, Can also be drilled to mount a third bearing support on.
$39.00
Copper Spark Plug Indexing Washers, 30 Count
30 Pack, Spark Plug Index Washers
.012" Thick, .3mm Thick
.012" Thick, .3mm Thick
$11.80
Direct Drive #219 Engine Sprocket
Direct Drive #219 Black Sprocket, Fits Tapered PTO Crank Shaft
Select Teeth
Select Teeth
$19.95
Eagle Kart Cassette to Brake Bracket Mounting Bolt M8x65mm
8mm x 65mm Brake Caliper Bracket to Bearing Cassette Mounting Bolt
$3.50
Eurostar Dynamica Driver Panel, Black
CIK Homologated Nassau Plastic Driver Panel, Black
Wider Driver Panel Improves Aerodynamics, Great for Larger than Average Drivers!
$129.90
Feeler Gauge Set, Great for Spark Plugs, Clutch Air Gap
Feeler Gauge Set from .0015" to .035" thickness, also includes Metric conversion
Easily set spark plug gap, check air gap on clutches
Easily set spark plug gap, check air gap on clutches
$8.95
Front Nose Lead Weight Shaped to Fit Under OTK Lower Steering Support, 4.5 Pound Weight
OTK Tony Kart Custom Shaped Lead Weight to Fit Under the Lower Steering Support on Full Sized Model OTK Model Karts
~4.5 Pounds
For Pre 2022 Chassis and 2022 and Newer Chassis, Select Option
~4.5 Pounds
For Pre 2022 Chassis and 2022 and Newer Chassis, Select Option
$85.00
G-Man Rubber Carburetor Cover, Fits Yamaha, X30, Swift, Leopard etc.
G-Man Rubber Carb Cover (for use with filter cup)
2 7/16" ID
2 7/16" ID
$4.75
Heavy Duty Nylon Brake Line 3/16" OD
Sold Per Foot
This is cut as a continuous piece. Example - If you order 7 feet, you will get (1) 7 foot piece, not 7 one foot long pieces.
This is cut as a continuous piece. Example - If you order 7 feet, you will get (1) 7 foot piece, not 7 one foot long pieces.
$0.50
IAME Swift Airbox Rainhood Cover
Swift Plastic Air Box Rain Hood with Mounting O-Ring
Fits on top of OEM Swift Airbox for Rain Conditions, Rain cover design includes unique rain gutter to help keep moisture from entering the intake
Available as rainhood only or complete kit with Swift Airbox, Rubber Boot, Hose Clamp and Rain Hood - Have your rain air box ready to go!
Fits on top of OEM Swift Airbox for Rain Conditions, Rain cover design includes unique rain gutter to help keep moisture from entering the intake
Available as rainhood only or complete kit with Swift Airbox, Rubber Boot, Hose Clamp and Rain Hood - Have your rain air box ready to go!
$75.00
iKart CBX RM2 Sprint Racing Kart
Complete Rolling Chassis, Tires Sold Separately
Due to the amount of options and to provide you with the best possible chassis for your application please contact us for pricing and to order this product.
Independent Caster/Camber Adjustment
Removable Front Torsion Bar
Fine Front and Rear Ride Adjustment
Highly Adjustable and Unique Seat Struts
Fully Adjustable Aluminum Pedals
25mm Front Spindles
50mm Axle with Unique Bearing Cassettes
Braided Brake Lines
Carbon Fiber Floor Tray
KG CIK Bodywork
Keyed Steering Wheel Hub
KG Flat Top Steering Wheel
Douglas Magnesium Wheels
Righetti Quick Release Fuel Tank
Made in the USA!
Please call 317-462-3413 for more info on this productDue to the amount of options and to provide you with the best possible chassis for your application please contact us for pricing and to order this product.
Independent Caster/Camber Adjustment
Removable Front Torsion Bar
Fine Front and Rear Ride Adjustment
Highly Adjustable and Unique Seat Struts
Fully Adjustable Aluminum Pedals
25mm Front Spindles
50mm Axle with Unique Bearing Cassettes
Braided Brake Lines
Carbon Fiber Floor Tray
KG CIK Bodywork
Keyed Steering Wheel Hub
KG Flat Top Steering Wheel
Douglas Magnesium Wheels
Righetti Quick Release Fuel Tank
Made in the USA!
KG 507 CIK Driver Panel, Wide for Improved Aerodynamics
Plastic Nassau Plastic Driver Panel, Black, CIK Approved 003-BP-02
Select Color, Black or Pearl White
Wider Senior and Junior Kart Driver Panel Improves Aerodynamics, Great for Larger than Average Drivers!
Predrilled with Mounting Holes with Rubber Mounting Grommets Included
$91.35
L0206 Bolt Kit for Engine Tech Tether Wire
3 - Bolt Kit for Engine Tech Tether Wire, Bolts are drilled to proper wire size.
$9.95