CART: Cart is empty | Checkout
Bestsellers
-
$1.25
Orange Heavy Duty Fuel Line 1/4" ID
-
$1.25
Clear Fuel Line 1/4" ID
-
$1.25
Colored Fuel Line 1/4" ID
-
$1.30
OTK Kart Numbers
-
$2.40
Freeline Birel Fuel Line
CKS
Products
E-Clip Safety Clip
Various Sizes Available, Select Size
3/16", 7/32", 3/8" and 1/2" (spindle shaft)
3/16", 7/32", 3/8" and 1/2" (spindle shaft)
$0.60
Number Panel Holder Bolt Kit
M6 Button Head Bolt Kit for Plastic Number Panel Holder
*Plastic Holder Strap Sold Separate
*Plastic Holder Strap Sold Separate
$1.75
Red Line Oil Funnel
Unusual Shape Great for Hard to Reach Spots, Small, Perfect for Briggs Engines
$8.00
Small Aluminum Four Cycle Chain Guard, Briggs, Clone
With Side Lip, No Hardware Included
3 1/4" Wide x 6" Long x 2" Tall
3 1/4" Wide x 6" Long x 2" Tall
$10.95
Tire Pryr Kit for 5 inch Wheels, Tire Removal and Mounting Tool
The "Original" Tire Pry'r Tire Mounting/Remover Tool, Works on 5" Wheels
$159.00
Eagle Kart Weld On Steel Spindle C
Steel Spindle C as used on the Eagle Kart
2 3/4" Overall Height, 2 1/4" Inside Height, 2" Overall Depth, 1 5/8" Plate Width on Back, .240" Thick
20mm Pill Hole ID Size
2 3/4" Overall Height, 2 1/4" Inside Height, 2" Overall Depth, 1 5/8" Plate Width on Back, .240" Thick
20mm Pill Hole ID Size
$26.00
Comet European Spindle C, Weld On
22mm Center Hole, 30mm Bolt Spacing with 4mm Threads, 55mm Inner C Spacing
$19.00
Metric Throttle Cable Adjuster M6 Thread with Jam Nut
Includes 6mm Jam Nut, Steel
6mm Thread Size
3mm Hole (.122")
6mm Thread Size
3mm Hole (.122")
$3.00
3/4" Thin Steel Clamp with Black Rubber Coating
Great for Mounting Body Panels or Number Panels
$1.90
4qt Low Profile Aluminum Fuel Tank
*With Fuel Level Sight Tube*, Includes Fuel Shutoff Valve
$147.00
6mm Hex Head Metric Bolts
6mm (1mm Pitch) Hex Head Metric Bolts
Black or Silver Zinc Finish Available Depending on Length
Black or Silver Zinc Finish Available Depending on Length
$0.60
8mm All Metal Locking Nut - Non-Nylock
8mm Locking Nut - Non-Nylock, All metal locking nut
Buy a 10 Pack and Save $$
Buy a 10 Pack and Save $$
$0.80
Replacement Battery CR1/3N, Sniper
For Sniper Laser Aligner, Also fits Eagle Eye Laser Chain Aligner, This is one battery for one side only. You must buy 2 if you are replacing batteries in both sides.
$6.25
1/8in NPT Straight Compression Fitting
National Pipe Thread, Fits 3/16" Plastic Nylon Brake Line
Includes Fitting, Internal Ferrell and Cap
Includes Fitting, Internal Ferrell and Cap
$3.00
10633 Standard Ball End Driver Allen Wrench Set
Black Screw Driver Style Handle with Ball End, 8 Piece Set
$57.00
17mm Adjustable Width Front Wheel Hub Sleeve Only, 40mm Outer Diameter
Aluminum Adjustable Sleeve, 17mm Bearings with 40mm Outer Diameter for Wheel Hub
90mm Long (3 1/2"), Outer Bearing is 20mm Inset into Hub
No Lip Hub or Removable Lip 40mm Hub Recommended
90mm Long (3 1/2"), Outer Bearing is 20mm Inset into Hub
No Lip Hub or Removable Lip 40mm Hub Recommended
$42.00
20mm Magnesium Angled Steering Wheel Hub
Lightweight hub, angled for steering ergonomics, fits 20mm steering shaft
Tapped holes so you don't need to put nuts on the steering wheel bolts
Tapped holes so you don't need to put nuts on the steering wheel bolts
$52.00