Comet Racing Engines

Comet Racing Engines is our in house championship winning Two Cycle engine building service! Comet Racing Engines have won for decades from coast to coast and outside the USA, including local club races, Divisional series, National Races (SKUSA, USPKS, WKA) and special events like the SuperKartsUSA! Supernats, Robopong 200, Battle at the Brickyard, Cup Karts Grand Nationals and the Rock Island Grand Prix against the very best karting has to offer.

Comet Racing Engines is led by a team of experienced racers with backgrounds that span the range of the motorsports and automotive world. Jason Zentz comes from a background of building and racing drag bike and quads and Ron Peterson with decades of karting experience in both 100cc and Shifter Kart racing as well as years in the automotive repair and service business. We are here to help you reach the winners circle.

Comet continually track tests and dyno tests on our extremely accurate and repeatable computer controlled dynos looking for any horsepower and torque gains. Comet specializes in IAME KA100, IAME Swift, IAME X30, Yamaha KT100 and Rok VLR engines.

If you're looking to step up your engine program call Jason Zentz and Ron Peterson today for more information! We're here to help you achieve the results you are looking for! Call us at 317-462-3413 or email us.
 

Please pack your engine VERY well. The shipping companies are not easy on engines so we highly recommend packing your engine in a small box with a lot of packing, including protection of the PTO shaft THEN put the small box inside a larger box with packing around the smaller box. Yes this sounds like a lot of packing but it is necessary to assure your engine makes it to us unharmed.

NOTICE - To avoid carburetor damage, please remove the carburetor on any X30 or KA100 engine you ship. The carbs on those engines sit low and will be damaged when the engine is dropped by the shipping company. Please pack the carburetor well to avoid damage and breaking off the needles.

Please do not send your motor mount, exhaust header springs that are loose (if they are firmly attached to the header they are fine), inline throttle cable return spring, exhaust pipe that goes on the kart (headers that are bolted to the engine are fine and are needed in most cases), wiring harness that goes on the kart. It's hard to keep track of all these accessories and the less sent to us the easier it is to make sure you get all your accessories back. If you have a problem with an accessory and want us to check it out that is okay. If you need any clarification please contact us.