CART: Cart is empty | Checkout
Bestsellers
-
$1.25
Orange Heavy Duty Fuel Line 1/4" ID
-
$1.25
Clear Fuel Line 1/4" ID
-
$1.25
Colored Fuel Line 1/4" ID
-
$1.30
OTK Kart Numbers
-
$2.40
Freeline Birel Fuel Line
IAME KA100
Products
SHOWN WITH OPTIONAL PARTS - STUDS, SEALS, BEARINGS SOLD SEPARATELY
All Comet KA100 Blueprinted Carbs are Dynoed for Maximum Performance and Function - Most Comet Blueprinted Carburetors are built to order, please allow extra time for shipment
USPKS, WKA and SKUSA Legal
This item is not eligible for free shipping
Piston and Ring, NO Piston Circlips Included.
Includes Piston, Ring, Circlips
Green dot piston are slightly smaller than the red dot pistons of the same size
0.05mm Shim (.0015")
30407 0.10mm Shim (.0039")
30404 0.15mm Shim (.0059")
0.2mm Shim (.008")
KA100 Cylinder Case Gasket
The KA100 pipe now includes a welded EGT bung from the factory. But read below to understand what's changed.
The bung can be prepped for use with the Big Nut EGT sensor style or the 5mm external thread small EGT sensor. The bung is made to handle either style. BUT the pipe is not ready out of the box for either bung.
If you want to use the Big Nut Style EGT you will need to drill a small hole in the bottom of the pipe bung so the sensor can be inserted.
If you want to use the 5mm External Thread Style EGT sensor it requires grinding down or cutting down the EGT bung to the "flat" in the bung then drilling the center of the bung so the sensor can pass through BUT not so big you remove the inner 5mm threads. Sometimes you need to run a 5mm tap through the hole to clean the threads after cutting and drilling.
In either case Comet can prep the bung for you if you wish then it will be ready for you when you receive it. Just select the option on the dropdown menu.
These Cylinders Are beyond Max Bore Size For KA100 Pistons
They Can Be Bored Out To Accommodate IAME X30 Pistons Which Start At 54.00