home | Chassis & Parts | Complete Racing Kart Chassis | Eagle Karts | Comet Eagle 30/32mm Racing Kart
Comet Eagle 30/32mm Racing Kart
Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Kart with FP7 2016 Sticker Kit Eagle Angled Steering Hub Eagle Spindle Eagle Kart with Optional Parts Eagle Kart with Optional Parts Eagle Rear Eagle Front End and Pedal Eagle Engine Rail Side

Comet Eagle 30/32mm Racing Kart

 
Four Cycle and Two Cycle Rolling Chassis, 2018 Briggs LO206 Cup Grand Nationals Senior Winner, 2018 LO206 Battle at the Brickyard Senior and Masters Race Winner, 2018 Maxxis Cup Multiple Race Winner, Winner of the 2016 WKA Winter Cup LO206 Senior Championship, Double Race Winner at Daytona Manufacturers Cup in LO206 Senior, Multiple Race Winner at WKA Gold Cup

The Eagle kart uses a custom combination of 32mm and 30mm karting specific tubing

Eagles are available with LO206, Honda and Clone engines as a turnkey package. Chain drive or belt drive. Lots of options available. Low cost, lots of fun!

Due to the amount of options and to provide you with the best possible chassis for your application please contact us for pricing and to order this product.
 
Please call 317-462-3413 for pricing and to order this product.
 
The origin of the Eagle chassis started with a need for an affordable but competitive sprint kart that the average entry level karter can afford. Unfortunately there is usually a compromise between a quality chassis and an affordable chassis. With the Eagle we wanted to change that!

Since the most important part of any kart is the frame we have made no compromise in it's quality and construction. You can always upgrade bolt on components but short of a tube bender, a blow torch and a welder you can't change the frame! So what makes the Eagle frame special? The tubing. The Eagle is made out of 30mm and 32mm tubing imported from Europe. The tubing is purchased from the exact same mills that the major European Manufacturers buy their tubing from. It does matter! You can buy off the shelf tubing but it is not the right stuff to build a competitive race kart. We buy the tubing in bulk, have it ocean freighted to the USA where it is cut, bent, coped and TIG welded right here in Indianapolis. We also powder coat the kart locally.

The kart is then assembled in house here at Comet using components sourced from US suppliers and machine shops as well as select European parts suppliers. The Eagle is available in a basic model with 1 1/4" axle or can be upgraded to a 40mm or 50mm axle. The amount of upgrades are extensive including seat, steering wheel, wheels, axle, hubs, spindle shaft diameter and bodywork.

The Eagle is designed to run with an inboard drive engine like a LO206, Clone or Animal engine or can be run outboard with a Yamaha, KA100 or TaG Engine. The Eagle is designed to be very versatile.

Hybrid 30mm and 32mm Karting Specific Chromoly Tubing
TIG Welded
American Made MCP Brakes with Flat Brake Disc and Steel Braided Lines
Angled Aluminum Steering Hub for Better Driver Ergonomics
17mm Front Spindles, Predrilled for Safety Pin with Two Tie Rod Ackerman Holes (25mm Available)
10mm Kingpin Bolt for Increased Spindle Strength with Adjustable Offset Pills and Center Pills
Fiberglass Sprint Kart Seat
Laser Cut Aluminum Floor Tray
Douglas or Van-K Spun Aluminum Wheels (Magnesium Available)
Three Position Adjustable Rear Ride Height with Unique Bearing Cassette Design
Front Adjustable Ride Height with self centering washers
Billet Aluminum Throttle and Brake Pedals with Multiple Adjustments
Quick Release KG Fuel Tank, available in 3.5 or 8.5 liter
Your choice of KG CIK Bodywork including 506, FP7 or Buru, Many Colors Available
KG Plastic Adjustable Rear Bumper
Eagle Sticker Kit for KG Bodywork Available - Optional
KG Suede Wrapped Padded Round Steering Wheel Available in Three Colors, Flat Top and Eagle Embroidered Steering Wheel also Available - Optional
Removable Front Torsion Bar and Clamps Available, Sold Separate
Adjustable Aluminum Foot Heel Rest Available - Sold Separate
Extended Pedal and Porch Kit Available for Tall Drivers
Tubing is cut, coped, welded, painted and the frame assembled in the USA!

Base Model - Eagle Rolling chassis with Douglas Wheels, Black Fiberglass Seat, 1 1/4" Axle Assembly, KG Bodywork, KG Fuel Tank, Rear Wheel Hubs $2900.00, Tires Sold Separately

Let us price out a custom Eagle Kart package for you! Call for Pricing 317.462.3413
: *
: *
: *
 
5/8" Two Piece Aluminum Split Collar
 
203015A Comet 40 Series Drive Unit, 1" Bore
 
Burris 11x6.00-6 SS-22
 
DPE-KTBO4FS 32mm Front Torsion Bar
5/8" Two Piece Aluminum Split Collar
 
203015A Comet 40 Series Drive Unit, 1" Bore
 
Burris 11x6.00-6 SS-22
 
DPE-KTBO4FS 32mm Front Torsion Bar
 
J. 0039.V32 Tony Kart OTK Aluminum Engine Mount Bracket 92x32mm, Two Bolt Hole
 
Molecule Helmet Cleaner and Polish
J. 0039.V32 Tony Kart OTK Aluminum Engine Mount Bracket 92x32mm, Two Bolt Hole
 
Molecule Helmet Cleaner and Polish
Digital Momentum

All Contents © 2019 Comet Kart Sales. All rights reserved.

Website design and development by Digital Momentum