CKS

Products

Aluminum Pedal Foot Grips for Small Diameter Pedals
.395 Grip ID, 3 1/8" (80mm) Long, Sold as a Pair
$11.95
Aluminum Popoff Gauge Fitting End
Replacement End for Carburetor Popoff Gauge with O-Ring
$14.00
Aluminum Rear Bumper Pipe Bracket
Select Size ID
$10.50
Aluminum Reducer, 10mm to 5mm for Water Sensors
This aluminum reducer allows a 5mm H20 sensor to be used in a 10mm water coupler or 10mm engine head
$6.00
Aluminum Small Catch Can
Measures - 1 5/8" Diameter X 4" Tall

Includes hose clamps for mounting to kart
$21.50
Aluminum Sprocket Holder
Keep your sprockets organized with this rack, 24 Slots, Fits 219 and 35 pitch sprockets
$39.00
American 1/4"-28 Rim Bolt Kits for Two Piece Rims
Includes - 3 Bolts, 3 Nuts
$1.50
American Hub Bolt Kit 1/4"-28, Smooth Nut
Includes - 3 Bolts, 3 Nuts
$1.70
American Hub Bolt Kit 5/16"-18 Course Thread
Includes 3 Bolts, 3 Nuts
$4.00
American Hub Bolt Kit 5/16"-24 Fine Thread
Includes - 3 Bolts, 3 Nuts
$4.00
Andrews Aftermarket HDC5-A Clutch Drum
Close Out, Select Teeth

For One Disc HDC-5 Clutch Only
$49.95
Angled Steering Hub for 3/4" Shaft, Silver
Steering Wheel Holes are Predrilled and Tapped for M6 Bolts.
$45.00
Appco 1 1/4" Sprocket Hub with hardware
Appco 1 1/4in Karting Gear Hub

$36.00
Arrow, Margay, Eagle 19mm Angled Steering Wheel Hub
Fits 19mm (3/4") Steering Shafts

$44.95
Axle O-Ring Belt for Water Pump
Black Rubber, Goes on Axle to Turn Water Pump, Water Pump Belt
$3.00
Axle Snap Ring 1 3/4"
Fits in the Snap Ring Groove on the end of the axle
$1.50
Axle Snap Ring 1 3/8" and 35mm
Fits in Snap Ring Groove on the end of the axle
$0.80
Axle Snap Rings 40mm
For Axle Snap Ring Grooves
$0.95
Axle Snap Rings for 1" and 1 1/4" Axles
Fits in Snap Ring Grove on the end of the Axle
$0.85
Bar Stool Project Kit with Wheels and Tires
Bar Stool Project Kit, Includes everything except Engine and Barstool

With or Without Wheels and Tires
$1699.95
Battery Tender Junior 800 Battery Wall Charger and Maintainer
For TaG and Rotax Batteries, Works on Lead Acid and Lithium Ion Batteries

Input - 120 volt Wall Charger
Output - 800mA Charger
$44.95
Battery Tender Junior 800 Battery Wall Charger and Maintainer
For TaG and Rotax Batteries, Works on Lead Acid and Lithium Ion Batteries

Input - 120 volt Wall Charger
Output - 800mA Charger
$44.95
Beadmaster Tire Beading Tool
Steel Band, Adjustable tire ring for all kart tires from 450x5 up to 810x6 tires, 9 1/2" Wide
$95.00
Black Aluminum One Hole Steering Block for 5/8" Steering Shaft
5/16" Steering Shaft Block, Single Hole, 5/16" Mounting Hole Size
$9.00
Black Cut Top 4 Spoke Steering Wheel
Black Cut Top 4 Spoke Steering Wheel
$59.95
Body Graphics Saver Pair
Includes Hardware
$24.00
Bolt Head Drill Block Tool
Allows easy drilling of cap screw and hex bolt heads, for use with a safety wire
$39.95
Braided O-Ring Belt for Water Pump
Fits on Axle to Turn Water Pump with Hook, Water Pump Belt
$5.00
Brake Bracket, Aluminum
Works with Standard and Mini Lite Brake Caliper, For 1 1/4" Axles
$27.00
Brake Caliper Bracket, Steel
MCP or Enginetics Brake Caliper Bolt Pattern
$12.00
Brake Master Cylinder Bracket
1 1/4" Height, 1 1/4" Center to Center on Hole
$5.50
Brass Popoff Gauge Replacement Fitting End
Replacement End for Carburetor Popoff Gauge with O-Ring
$9.50
Briggs Flathead Carb Rain Cover/Dirt Deflector
Plastic Briggs Flathead/Raptor Carb Rain Cover or Dirt Deflector
$11.95
Briggs Heavy Duty Exhaust Pipe Hose Clamp #206HD
Stainless Steel Briggs Heavy Duty Exhaust Pipe Hose Clamp

1 1/2" OD
$4.80
Briggs LO206 Carburetor Float Height and Float Drop Gauge Tool
Adjustable slide so you can set your Briggs LO206 carburetor float height accurately. Also measures float drop.
$29.95
Briggs LO206 Carburetor Float Height and Float Drop Gauge Tool
Adjustable slide so you can set your Briggs LO206 carburetor float height accurately. Also measures float drop.
$29.95
Briggs LO206 Carburetor Slide Setting No-Go Gauges
LO206 Tech Tool for Green and Yellow Slides

To get maximum legal performance you need to make sure the slide opens to the maximum.

These Go-No-Go gauges are .005" smaller than the maximum on one end and right on the maximum on the other end. Just a few thousandths makes a big difference.
$24.95
Briggs LO206 Fuel Pump Riser Kit
Plastic Fuel Pump Riser Spacer
Transfers block heat away from fuel pump to keep fuel cooler
Keeps oil from gathering in pulse line.
$19.95
Briggs Magnetic Oil Drain Plug
Magnetic Tip collects ferrous metal particles in the oil so they can be removed from the engine during oil changes
$8.50
Briggs Oil Plug Removal Tool
Removes Oil Plug from Briggs motors for easy re-filling

Oil Plug Removal Wrench for Briggs LO206, Animal, Flat Head, World Formula Engines

10 1/2" Overall Length
$19.95
C. Tony Kart OTK Aftermarket Aluminum Steering Wheel Hub, Angled, 6 Hole
Angled OTK Aftermarket Steering Wheel Hub
$50.00
Castle Nut
Select Thread Size
$0.40
Chain Guard Bolt Kit for Four Cycle, Briggs
Fits Briggs Engines and Some Clone Engines

2 - 5/16-24 Button Head Allen
2 - 5/16" Star Locking Washer
$3.00
Checkered Flag Tape
Checkered Flag Racers Tape

2" Wide X 45 Ft.
$9.95
Chicken Hawk Tire Warmers Set of Four
Max Temp 165 Degrees F, Hit the track with your tires already up to temp
$449.00
Chrome End Frame Rail Plug
Plastic with Chrome End, Select Size
$2.05
Chrome Pedal
Quicksilver Late Model 1989-1993 Enduro Parts
$13.00
Chrome Sprocket Holder
For One Piece Sprockets only, Easily transport your sprockets with this rack
$39.95
Chrome Steering Post Upright Weld On (1-Hole Style)
Sold Per Side, Only has One Hole
$21.00
Circlip for 8mm Uniball Bearing
M8x25 OD Bearing Clip
$1.50
Digital Momentum

All Contents © 2019 Comet Kart Sales. All rights reserved.

Website design and development by Digital Momentum