CART: Cart is empty | Checkout
Bestsellers
-
$1.25
Orange Heavy Duty Fuel Line 1/4" ID
-
$1.25
Clear Fuel Line 1/4" ID
-
$1.25
Colored Fuel Line 1/4" ID
-
$1.30
OTK Kart Numbers
-
$2.40
Freeline Birel Fuel Line
CKS
Products
Tank Rubber Grommets 7/8"ID X 1½"OD
Quicksilver Parts - Enduro Early Model
.184" Thick (3/16")
.184" Thick (3/16")
$0.90
1/4-28 X 7/8" Drilled Hex Head Bolts
Drilled 1/4-28 X 7/8" for Steering Wheels
Buy a 10 Pack and Save $$
Buy a 10 Pack and Save $$
$0.95
10mm Socket Head Cap Screw Metric Allen Bolts
10mm (1.5mm Pitch) Socket Head Cap Screw Metric Allen Bolts
Black or Silver Zinc Finish Available Depending on Length
Black or Silver Zinc Finish Available Depending on Length
$0.95
6mm Flanged Hex Head Metric Bolt for Sprocket Hub
M6x20 Black Oxide Hex Head Flange Bolt, Great for Sprocket Hubs
Easy to hold wrench on the bolt to loosen or tighten the sprocket nut on hubs without tapped holes
Easy to hold wrench on the bolt to loosen or tighten the sprocket nut on hubs without tapped holes
$0.95
M6 x 1.0mm Set Screw for Bearing, Course Thread
Set Screw Fits some 25mm and 30mm Axle Bearings
Not as popular for bearings as the M6 x .75 mm Set Screw (Fine Thread)
Not as popular for bearings as the M6 x .75 mm Set Screw (Fine Thread)
$0.95
Reusable Plastic Fuel Line Clamp
Reusable Plastic Fuel Line Clamp for 1/4" OD Line
Buy a 10 Pack and Save $$
Buy a 10 Pack and Save $$
$0.95
Vinyl White Stick On Number Panel
Side, Rear Background Panel - 7 1/4" Tall, 8 7/8" Wide
Buy a 10 Pack and Save $$
Buy a 10 Pack and Save $$
$0.95
1/4" (6mm) Plastic Conical Washer
Select Color
Fits 1/4” or 6mm Conical Bolts
Great washer size for mounting bodywork and floor trays
Fits 1/4” or 6mm Conical Bolts
Great washer size for mounting bodywork and floor trays
$1.00
11X Red Plastic KA Junior Exhaust Header Cover Insert
Fits IAME KA Junior Exhaust Header, Goes inside the Exhaust Header, fits 22mm Restricted Header
Measures 13/16" (20mm) at Narrowest point, then flares out
Measures 13/16" (20mm) at Narrowest point, then flares out
$1.00
13X Red Plastic Mini Swift Exhaust Header Cover Insert
Fits IAME Mini Swift Exhaust Header, Goes inside the Exhaust Header
Measures 15/16" (25mm) at Narrowest point, then flares out
Measures 15/16" (25mm) at Narrowest point, then flares out
$1.00
14 Red Plastic Cover Insert for X30 Intake Manifold Hole
Fits IAME X30 Intake Manifold, Goes inside the X30 Intake Manifold when Carburetor is Removed
Measures 1 1/16" (28mm) at Narrowest point, then flares out
Measures 1 1/16" (28mm) at Narrowest point, then flares out
$1.00
17 Red Plastic Header Cover Insert for KA100 Senior Exhaust Header
Fits IAME KA100 Senior Header, Goes inside the Exhaust Header
Measures 1 7/16" (36.5mm) at Narrowest point, then flares out
Measures 1 7/16" (36.5mm) at Narrowest point, then flares out
$1.00
18X Red Plastic Exhaust Header Cover for New Style X30 Header, KA100 Senior Header
Fits IAME X30 New Style Senior Header, KA100 Senior Header, Goes over the outside of the Manifold
Measures 1 11/16" (43mm) at widest point, then tapers
Measures 1 11/16" (43mm) at widest point, then tapers
$1.00
250 Red Plastic Carburetor Cover for IAME Swift, KA100, X30, Yamaha KT100
Works on IAME Swift, KA100 and X30 Carbs, Vortex Mini Rok, Yamaha KT100 and others
Measures 2.5" (63.5mm) at widest point, then tapers, goes over the outside of the carburetor
Measures 2.5" (63.5mm) at widest point, then tapers, goes over the outside of the carburetor
$1.00
5mm Flat Head Metric Allen Bolts
5mm (.8mm Pitch) Flat Head Metric Allen Bolts
Flat Heads are Measured by Overall Length
Flat Heads are Measured by Overall Length
$1.05
5X Red Plastic Spark Plug Hole Cover Insert, 14mm Spark Plug Holes
Fits Spark Plug Hole when Spark Plug is Removed, Fits 14mm Spark Plug Holes
Measures 1/2" (12.5mm) at Narrowest point, then flares out
Measures 1/2" (12.5mm) at Narrowest point, then flares out
$1.00
7 Red Plastic Micro Swift Restricted Exhaust Header Cover Insert
Fits IAME Micro Swift Exhaust Header, Goes inside the Exhaust Header
Measures 9/16" (14.5mm) at Narrowest point, then flares out
Measures 9/16" (14.5mm) at Narrowest point, then flares out
$1.00
8mm Safety Clip
Safety Clip for 8mm Bolt End (for bolts with groove machined in them only)
Buy a 10 Pack and Save $$
Buy a 10 Pack and Save $$
$1.00
Low Cost Bumper Bracket 8mmx45mm Button Head Allen
Bolt used for attaching Low Cost Bumper Brackets to chassis
$1.00
5/16" (8mm) Plastic Conical Washer
Select Color
Fits 5/16” or 8mm Conical Bolts
Great washer size for mounting kart seats
Fits 5/16” or 8mm Conical Bolts
Great washer size for mounting kart seats
$1.25
Eagle 8mmx20mm Hex Flange Cassette Bolts
Eagle Cassette Bolts, 8mmx20mm Hex Flange Bolt, Requires 3 per Cassette
$1.25
Rubber Cushioned Loop Style Clamp
Zinc Plated Steel, Multiple Uses, Brake Lines, Electrical, Number Panels
Select Size
Select Size
$1.25
Euro Style Yellow Background Stick On Kart Number
Sticky Back, Yellow Background with Black Number
Measures - 6 5/16" Tall x 2 1/2" Wide
Measures - 6 5/16" Tall x 2 1/2" Wide
$1.30
Comet White Background Kart Numbers
Comet Numbers, Sticky Back, White Background with Black Number
6 1/4" Tall, 2 9/16" Wide
Buy a 4 Pack and Save $$
6 1/4" Tall, 2 9/16" Wide
Buy a 4 Pack and Save $$
$1.35
1/8in NPT Compression Fitting Nut
National Pipe Thread
Replacement Nut for Compression Fittings
Replacement Nut for Compression Fittings
$1.40
Plastic High Strength 36" Long Battery Plastic Tie Wrap
Plastic High Strength 36" White 175lb Tensile Strength Tie Wrap
Use for Batteries, Mandatory for Tech in Many Series - USPKS, SKUSA
Use for Batteries, Mandatory for Tech in Many Series - USPKS, SKUSA
$1.40
30mm Kartmaster Ceramic Bearing 6mm Set Screw
6mmx1.0mm Pitch Set Screws for Kartmaster 30mm Ceramic Bearings
Does NOT fit 40mm or 50mm Kartmaster Ceramic Bearings
Does NOT fit 40mm or 50mm Kartmaster Ceramic Bearings
$1.50
6mm x 40mm Hex Flange Gear Guard Bolts
6mm x 40mm Hex Flange Full Thread Zinc Plated Bolts
These work great for the KG and Gman Sprocket Guards.
These work great for the KG and Gman Sprocket Guards.
$1.50