CART: Cart is empty | Checkout
Bestsellers
-
$1.25
Orange Heavy Duty Fuel Line 1/4" ID
-
$1.25
Clear Fuel Line 1/4" ID
-
$1.25
Colored Fuel Line 1/4" ID
-
$1.30
OTK Kart Numbers
-
$2.40
Freeline Birel Fuel Line
Odenthal
Products
New! Odenthal Low Profile Two Cycle Pro Series Motor Mount
Lower Profile Odenthal Pro Series Mount, Less Height and Angle than other Odenthal Mounts Lowers the Engine Height for More Clearance for the Driver and Lower Center of Gravity
0 Degree and 5 Degree Angle
Select Clamp Frame Rail Size
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
0 Degree and 5 Degree Angle
Select Clamp Frame Rail Size
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
$169.00
New! Odenthal EZ Set 4-Cycle Mount, Flat 0 Degree Angle
Fits International rail karts, Fits Briggs LO206, Animal, World Formula, Flat Head, Clones, Honda Engines, Select Clamp Size
Odenthal's Zero Degree 4-cycle EZ Set slider mount is the most rigid 4-cycle mount on the market and is highly recommended by Briggs and Stratton.
This 4-cycle mount has gone through many revisions over the years and the latest version is a streamlined design. Odenthal has added many more mounting holes which allows more offset, the ability to run the clutch inboard, and a bit lighter. Its sleek design and black anodize finish allow it to look good on any kart chassis.
Odenthal's Zero Degree 4-cycle EZ Set slider mount is the most rigid 4-cycle mount on the market and is highly recommended by Briggs and Stratton.
This 4-cycle mount has gone through many revisions over the years and the latest version is a streamlined design. Odenthal has added many more mounting holes which allows more offset, the ability to run the clutch inboard, and a bit lighter. Its sleek design and black anodize finish allow it to look good on any kart chassis.
$255.00
New! Odenthal Short Single Camera Go-Pro Mount
The EZGP mount is one of the most intricate products Odenthal has ever come out with. There is a great deal of machining that goes into these pieces. The camera mounts are precisely machined from 6061-T6 Aluminum which is aerospace grade material. Odenthal machines these to very tight tolerances to ensure every assembly fits perfect and won’t fail. They also use the best hardware to prevent rust or anything that could compromise the ability of the user to use the piece to its full potential.
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual cameras.
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual cameras.
$180.00
Odenthal EZ Set 4-Cycle Mount, 8 Degree Angle
Fits International rail karts, Fits Briggs LO206, Animal, World Formula, Flat Head, Clones, Honda Engines, Select Clamp Size
Odenthal's 8 degree 4-cycle EZ Set slider mount is the most rigid 4-cycle mount on the market and is highly recommended by Briggs and Stratton.
This 4-cycle mount has gone through many revisions over the years and the latest version is a streamlined design. Odenthal has added many more mounting holes which allows more offset, the ability to run the clutch inboard, and a bit lighter. Its sleek design and black anodize finish allow it to look good on any kart chassis.
Odenthal's 8 degree 4-cycle EZ Set slider mount is the most rigid 4-cycle mount on the market and is highly recommended by Briggs and Stratton.
This 4-cycle mount has gone through many revisions over the years and the latest version is a streamlined design. Odenthal has added many more mounting holes which allows more offset, the ability to run the clutch inboard, and a bit lighter. Its sleek design and black anodize finish allow it to look good on any kart chassis.
$265.00
Odenthal EZ Set Two Piece Engine Mount 0 Degree Flat
Includes Clamps, Select Size
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
Odenthal EZ Set Two Piece Engine Mount 5 Degree Angle
Includes Clamps, Select Size
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
New! Odenthal EZ Set Briggs 0 Degree Flat Top Plate Only
EZ Set Upper 0 Degree Mount Plate only for most Four Cycle Engines
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
$115.00
New! Odenthal Short Dual Camera Go-Pro Mount
The EZGP mount is one of the most intricate products Odenthal has ever come out with. There is a great deal of machining that goes into these pieces. The camera mounts are precisely machined from 6061-T6 Aluminum which is aerospace grade material. Odenthal machines these to very tight tolerances to ensure every assembly fits perfect and won’t fail. They also use the best hardware to prevent rust or anything that could compromise the ability of the user to use the piece to its full potential.
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual cameras.
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual cameras.
$207.00
Odenthal EZ Set Briggs 8 Degree Top Plate Only
EZ Set Upper 8 Degree Mount only for most 4 Stroke Motors
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
$125.00
Odenthal EZ Set Two Piece Engine Mount 10 Degree Angle
Includes Clamps, Select Size
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
Closeout! - Odenthal 10 Degree EZ Set Euro Mount 30mmx92mm
EZ Set line of two-piece adjustable motors mounts. The Euro mount is equipped with a base plate. The Euro mount uses the same top plates as the EZ-SET mount and has the same sliding capabilities. The base plate is designed to be paired with Euro clamps so that it can fully cradle the chassis.
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
Bolt Pattern fits Leopard, IAME X30, Rotax, IAME, Mini Swift, KA100, Vortex Rok, Mini Rok, Rok GP and many others
$249.00
Odenthal EZ Set 0 Degree Flat Top Plate Only
Odenthal OD-ESM0D1 0 Degree Flat Top EZ Set Top Plate Only
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
$104.00
New! Odenthal Long Single Camera Go-Pro Mount
The EZGP mount is one of the most intricate products Odenthal has ever come out with. There is a great deal of machining that goes into these pieces. The camera mounts are precisely machined from 6061-T6 Aluminum which is aerospace grade material. Odenthal machines these to very tight tolerances to ensure every assembly fits perfect and won’t fail. They also use the best hardware to prevent rust or anything that could compromise the ability of the user to use the piece to its full potential.
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual camera
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual camera
$216.00
Odenthal 4-Cycle Copper Vibration Plate
Odenthal Copper Vibration Plate helps keep engine vibration down, Fits in between motor and any engine mount
Works with Animals, LO206, World Formula, Raptors, Most Clone and Honda Motors
Bolt Hole Measurements -
6 3/8" Long x 3 1/8" Wide
Works with Animals, LO206, World Formula, Raptors, Most Clone and Honda Motors
Bolt Hole Measurements -
6 3/8" Long x 3 1/8" Wide
$46.00
Odenthal EZ Set 5 Degree Angled Top Plate Only
Odenthal OD-ESM5D1 5 Degree Top EZ Set Top Plate Only
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
$106.00
Odenthal EZ Set 10 Degree Angled Top Plate Only
Odenthal OD-ESM10D1 10 Degree Top EZ Set Top Plate Only
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
Have multiple engines? Make engine changes quick and easy with a Top Plate mounted to each of your engines! You can leave the slider mount in place on the frame!
$108.00
New! Odenthal Long Dual Camera Go-Pro Mount
The EZGP mount is one of the most intricate products Odenthal has ever come out with. There is a great deal of machining that goes into these pieces. The camera mounts are precisely machined from 6061-T6 Aluminum which is aerospace grade material. Odenthal machines these to very tight tolerances to ensure every assembly fits perfect and won’t fail. They also use the best hardware to prevent rust or anything that could compromise the ability of the user to use the piece to its full potential.
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual camera
The Go Pro Mount mounts to the seat strut and is available in four versions. The "short" 7" bar version is for Air Cooled Karts and is available for a single or dual camera. The "long" version is designed for karts with radiators and comes with two 7" bars and is available for single or dual camera
$243.00
Odenthal EZ-Set Base Flat Mount Only, No Engine Adapter Plate
Chassis Slider Mount Only, Engine Adapter Plate Available Separately
$129.00
Odenthal Motor Mount Clamp Socket Head Bolt M10x35
Replacement Socket Head Cap Screw Bolt for Motor Mount Clamp
10mm x 35mm
10mm x 35mm
$1.05
New! Odenthal Go-Pro Camera Anti Vibration Isolator Mount
Odenthal Racing Products Billet Aluminum Go Pro Camera Mount Anti Vibration Mount Is Designed To Help Eliminate The Vibration From the Kart To The Camera.
*Isolator rubbers might be blue or red
*Isolator rubbers might be blue or red
$75.00
Odenthal Briggs Base Plate Bolt Kit
Mounts the Top Plate to the Odenthal Bottom Slider Mount, 2 Bolts, 2 Washers
$5.00
Odenthal EZ-Set Mount Base Plate to Adapter Bolt and Washer Kit
Mounts the Top Plate to the Odenthal Bottom Slider Mount, 2 Bolts, 2 Washers
$5.00
Odenthal Thick Motor Mount Washer
Thick Washer Works with Odenthal EZ Set Mounts Bottom Slider Mount Bolts
21mm OD x 3mm Thick x 10.5mm Hole Size
21mm OD x 3mm Thick x 10.5mm Hole Size
$1.20
Odenthal Replacement Isolator Rubbers
Odenthal Racing Products Replacement Isolator Rubbers for Go Pro Camera Mount
These are the Replacement Isolator Rubbers for the Odenthal Go-Pro Camera Anti Vibration Isolator Mount
These are the Replacement Isolator Rubbers for the Odenthal Go-Pro Camera Anti Vibration Isolator Mount
$10.00
Odenthal 2-Cycle Copper Vibration Plate
Odenthal Copper Vibration Plate helps keep engine vibration down, Fits in between motor and any engine mounts.
Works with Two Cycle Engines including IAME X30, KA100, Mini Swift and Leopard Engines, Vortex ROK Engines
Hole Measurements -
3 1/8" Wide x 4" Long or 4 1/2" Long
Works with Two Cycle Engines including IAME X30, KA100, Mini Swift and Leopard Engines, Vortex ROK Engines
Hole Measurements -
3 1/8" Wide x 4" Long or 4 1/2" Long
$36.00
Odenthal Briggs Mount Stud Kit
Stud Kit for Mounting the Briggs Engine to the Odenthal Top Plate, 4 Studs, 4 Nuts
$9.50
New! Odenthal Tuff-Kase Aluminum Camera Case for GoPro 9, 10, 11, 12 Cameras
Odenthal's new EZGP Aluminum Tuff-Kase for GoPro Hero Cameras 9, 10, 11 with Wire Tether, Anti Twist Screw, Key Ring
Tuff-Case is only designed to fit the Odenthal Camera Mount with the Odenthal Anti-Vibration Isolator
$60.00
Odenthal Yamaha Third Bearing Support and Slider Mount
One Piece with Clamps for KT100 Yamaha, Select Clamp Size
New! Odenthal Camera Mount Clamp Only
OD-EZGP09-1 Odenthal Camera Mount Clamp Only
20mm Clamp for Seat Strut Tube
20mm Clamp for Seat Strut Tube
$38.75
Odenthal Bottom Motor Mount Clamps - Pair
Select Size
Bottom Mount Clamps for Odenthal Engine Mounts
Bottom Mount Clamps for Odenthal Engine Mounts
New! Odenthal Camera Mount 7" Replacement Arm
Odenthal Racing Products Billet Aluminum Camera Mount 7" Replacement Arm.
OD-EZGP05-1
OD-EZGP05-1
$42.00