CART: Cart is empty | Checkout
|
home
|
|
Bestsellers
Bar Stool Project
This is only an Example of a completed bar stool, No instructions are included
Customer supplies Engine and Barstool
** The bar stool project comes unassembled, unpainted and requires some welding (steering forks and rear bumper)
Customer supplies Engine and Barstool
** The bar stool project comes unassembled, unpainted and requires some welding (steering forks and rear bumper)
Products
3/16" Nylon Brake Line
Sold by the Foot
This is cut as a continuous piece. Example - If you order 7 feet, you will get (1) 7 foot piece, not 7 one foot long pieces.
This is cut as a continuous piece. Example - If you order 7 feet, you will get (1) 7 foot piece, not 7 one foot long pieces.
$0.50
Aluminum Handle Bar Steering Shaft Hub
Splined for 5/8" Steering Shaft, Fits 7/8" OD Handle Bar
$49.95
1 1/4" Bearing Flangette with 3 Holes
Flangettes are Sold Per Side, One Bearing Requires Two Flangettes
$5.25
Black Aluminum One Hole Steering Block for 5/8" Steering Shaft
5/16" Steering Shaft Block, Single Hole, 5/16" Mounting Hole Size
$9.00
Azusa Front Spindle 5/8"X4 1/2" Long With King Pin Bushings
Front Spindle with 5/8" Shaft, 4 1/2" Long
$24.95
Unpainted Barstool Frame
Frame Only for Bar Stool Project, Unpainted Bare Frame, Welded
Due to the size and weight of this item we must charge additional UPS
Due to the size and weight of this item we must charge additional UPS
$335.00
Hand Brake Activated Hydraulic Master Cylinder for Handle Bars
Left Hand, Bolts to 7/8" Diameter Handle Bars
DOT 3, DOT 4 or DOT 5.1 Fluid, for 3/16" Brake Line
NOT FOR USE WITH DOT 5 (DOT 5.1 is different than DOT 5)
DOT 3, DOT 4 or DOT 5.1 Fluid, for 3/16" Brake Line
NOT FOR USE WITH DOT 5 (DOT 5.1 is different than DOT 5)
$106.95
8oz DOT 5 Brake Fluid
Brake Fluid for MCP Brakes, Silicone based brake fluid
DOT 5 is not compatible with DOT 5.1 brake systems
DOT 5 is not compatible with DOT 5.1 brake systems
$15.00
7/8" Twist Grip Assembly with Dummy Handle
For 7/8" Shaft, Includes Twist Grip and Standard Rubber Hand Grip
$28.00
MCP 1375SE-BW Rear Black Caliper with Pads
Brake Disc, Includes Fittings and Bleeders, Quick Adjust Pad Gap, Can be Shimmed for Use with Wider Disk
Single Line with Internal Crossover, 1 3/8" Pistons
.300 Thick Shim is optional
Single Line with Internal Crossover, 1 3/8" Pistons
.300 Thick Shim is optional
$150.00
Bar Stool Project Kit with Wheels and Tires
Bar Stool Project Kit, Includes everything except Engine and Barstool
With or Without Wheels and Tires
With or Without Wheels and Tires
$1699.95
MCP 1 1/4" Aluminum Rear Brake Disc Hub
4 Bolt Pattern for MCP Rear Brake Discs
Fits 1 1/4 inch diameter axles
Fits 1 1/4 inch diameter axles
$19.95
