CART: Cart is empty | Checkout
Bestsellers
The Mychron 5S 2T Gauge boasts an improved, more accurate GPS receiver, faster processor, more memory and quicker WiFi data downloads compared to the first generation Mychron 5 gauge
The AiM MyChron5 2T has a high-resolution graphical display for the indication of rpm, speed, lap times, gear, two temperature, satellite reception and the data from the connected expansions as the lambda or MC-Expansion. It is possible to configure several display pages free and to select them over the 4 buttons. The display-illumination can be set in 7 different colors and the brightness is controlled by a light-sensor.
The Speed is gathered over the integrated GPS-Module, indicated on the display and can later with further GPS-channels, e.g. driven line, acceleration… be analyzed on the PC. The screwed on Lithium battery supplies the MyChron5 ten hours with power and can then be either charged or swapped. It also can be supplied by an external battery.
MyChron 5 2T has two in seven various colors configurable Alarm-LEDs and 5 Shift-LEDs. Both Alarm LEDs can be assigned to every arbitrary measurement and shift-LEDs can be set sequentially, in full group and gear-selective. Over the WiFi-Connection the configurations can be transferred, the data downloaded or the measurements online checked.
All sensors and cables from the MyChron4, as also MyChron- Expansion, Lambda-system and SmartyCam can also be used on the MyChron5 2T.
free configurable graphical display
multicolored configurable background illumination
5 RGB shift-lights
2 RGB Alarm-lights
Lap times with up to 5 split times
Light sensor for the illumination
integrated GPS05 Module
WiFi connection
4 GB storage
Gyroscope
Lithium battery
Technical data AiM MyChron5 2T -
RPM Tapping inductive from the ignition cable
Measuring range 0 up to 60.000 rpm
Time measurement Triggering over infrared, manual or GPS
Lap times without limits, up to 5 Split times
Measuring accuracy 1/100 sec.
Analogue channels Only over MyChron Expansion
Temperature 2 inputs
Thermoelement 0 – 999 °C, measuring accuracy + 0,75%
Thermo resistance up to 180 °C, measuring accuracy + 1°
2 Alarm-LED's when exceeding or falling below the set alarm values
Indication in °C or °F
Speed Gathering over integrated GPS or MyChron Expansion with sensor
Gear indication Calculated out of rpm and GPS speed
Connectors 1x Binder 711-3 | 1x Binder 711-4 | 1x Binder 711-5
Shift-light 5 free configurable RGB LEDs
arbitrary for each gear
Additional functions
Displays the difference to the fastest lap at the split times
Lap time projection
WiFi connection
Light sensor for display illumination
Free configurable Display indication
2 RGB Alarm-lights, free configurable multicolored Background illumination
Gyroscope
Data storage Non-volatile 4 GB-Storage
Data transfer WiFi 802.11 or DataKey
Power supply internal lithium battery (10 hours), optional over external 12V Battery
Updates Software- and Firmware updates for free over the internet
Dimensions Housing: 137 x 88 x 47
Display: 94,6 x 46,1
Weight 340 gr
The AiM MyChron5 2T has a high-resolution graphical display for the indication of rpm, speed, lap times, gear, two temperature, satellite reception and the data from the connected expansions as the lambda or MC-Expansion. It is possible to configure several display pages free and to select them over the 4 buttons. The display-illumination can be set in 7 different colors and the brightness is controlled by a light-sensor.
The Speed is gathered over the integrated GPS-Module, indicated on the display and can later with further GPS-channels, e.g. driven line, acceleration… be analyzed on the PC. The screwed on Lithium battery supplies the MyChron5 ten hours with power and can then be either charged or swapped. It also can be supplied by an external battery.
MyChron 5 2T has two in seven various colors configurable Alarm-LEDs and 5 Shift-LEDs. Both Alarm LEDs can be assigned to every arbitrary measurement and shift-LEDs can be set sequentially, in full group and gear-selective. Over the WiFi-Connection the configurations can be transferred, the data downloaded or the measurements online checked.
All sensors and cables from the MyChron4, as also MyChron- Expansion, Lambda-system and SmartyCam can also be used on the MyChron5 2T.
free configurable graphical display
multicolored configurable background illumination
5 RGB shift-lights
2 RGB Alarm-lights
Lap times with up to 5 split times
Light sensor for the illumination
integrated GPS05 Module
WiFi connection
4 GB storage
Gyroscope
Lithium battery
Technical data AiM MyChron5 2T -
RPM Tapping inductive from the ignition cable
Measuring range 0 up to 60.000 rpm
Time measurement Triggering over infrared, manual or GPS
Lap times without limits, up to 5 Split times
Measuring accuracy 1/100 sec.
Analogue channels Only over MyChron Expansion
Temperature 2 inputs
Thermoelement 0 – 999 °C, measuring accuracy + 0,75%
Thermo resistance up to 180 °C, measuring accuracy + 1°
2 Alarm-LED's when exceeding or falling below the set alarm values
Indication in °C or °F
Speed Gathering over integrated GPS or MyChron Expansion with sensor
Gear indication Calculated out of rpm and GPS speed
Connectors 1x Binder 711-3 | 1x Binder 711-4 | 1x Binder 711-5
Shift-light 5 free configurable RGB LEDs
arbitrary for each gear
Additional functions
Displays the difference to the fastest lap at the split times
Lap time projection
WiFi connection
Light sensor for display illumination
Free configurable Display indication
2 RGB Alarm-lights, free configurable multicolored Background illumination
Gyroscope
Data storage Non-volatile 4 GB-Storage
Data transfer WiFi 802.11 or DataKey
Power supply internal lithium battery (10 hours), optional over external 12V Battery
Updates Software- and Firmware updates for free over the internet
Dimensions Housing: 137 x 88 x 47
Display: 94,6 x 46,1
Weight 340 gr
