home | Safety Gear | Helmets | Arai Helmets | Arai GP-6S Helmet
Arai GP-6S Helmet

Arai GP-6S Helmet

 

Arai GP-6S Auto Racing Helmet, White

 
$949.95   [?]Add this item to the cart to see our Special Pricing!
 
Arai GP-6S Auto Helmet - Using the same shell shape as the GP-6(PED) & GP-6RC, the GP-6S provides a level of affordability while maintaining a host of features and innovations. The GP-6S utilizes the same shield as the GP-6(PED) as well as the same larger eye port size for increased peripheral vision. Using the familiar single intake, single exhaust found on the GP-5k the GP-6S replaces, the forward vent has been enlarged to improve air intake and improve overall ventilation performance. Constructed using proprietary "cLc" (Complex Laminated Construction) the GP-6S maintains light weight, while providing incredible shell strength and flexibility. A stronger shell allows Arai to use an extremely soft interior EPS liner for maximum comfort and excellent impact energy management. The GP-6S, like the GP-5k that came before it, is designed with the sport (hence the "S" designation) driver in mind.

- Positive shield lock mechanism provides solid latching, while allowing normal operation of the shield.
- Designed to be an integral component of the shield system and function, not just an add-on afterthought.
- The simplicity of the function masks the complexity of the design. - A feature taken directly from the new GP-6(PED).
- New shield pivot hardware improves aerodynamics. Wider eye port for increased peripheral field of view.
- Type "6" 3mm shield. Shield, pivot hardware and wider eye port are all the same as used on the new GP-6(PED) model.
- Type "6" components are exclusive to Generation-6 models.
- Large, closeable, intake vent combined with a larger 10mm hole greatly increases air intake.
- Larger 10mm rear vent hole further increases airflow.
- Newly integrated seats for HANS(r) posts.
- Pre-drilled shell to better facilitate proper installation.
- Flat surface to allow anchor post bases to rest flush with the surface of the shell around the entire perimeter of the base.
- Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity.
- Provides a stronger shell near the opening where it is needed as well as lowers the Center of Gravity. - Rise in shell above the shoulders for added clearance.
: *
: *
: *
 
2. 10.11010.04 Birel Cadet Sticker Kit MTS FL09/14 2013
 
3. 10.11013.10 Birel Mechanical Brake Caliper Lever M20x2 H5
 
4. 40.11225.00 Birel M8x25 Dowel Pin
 
5. 20.11033.06 Birel Mechanical Brake Caliper Piston
2. 10.11010.04 Birel Cadet Sticker Kit MTS FL09/14 2013
 
3. 10.11013.10 Birel Mechanical Brake Caliper Lever M20x2 H5
 
4. 40.11225.00 Birel M8x25 Dowel Pin
 
5. 20.11033.06 Birel Mechanical Brake Caliper Piston
 
Performance Adjustable Seat Strut 1 1/8", Black
 
Performance Adjustable Seat Strut 1 1/8" Short Left Hand, Black
Performance Adjustable Seat Strut 1 1/8", Black
 
Performance Adjustable Seat Strut 1 1/8" Short Left Hand, Black
Racersites

All Contents © copyright Comet Kart Sales 2012 All rights reserved.

Website design and development by RACERSITES